|
 ANTHF - 17/12M VERTICAL 
- FS: WARC Band Vertical Antenna
A custom-made 17M / 12M Vertical antenna manufactured by Zero-Five Vertical Antennas. Built with .058” tubing, this vertical is solid & substantial. The 17M vertical is 14 FT in length allowing for tuning to the frequency most desired, and the 12/M is 10 FT. The two verticals are mounted upon a common SO239 with a fold-over base, making setup & tuning easy. No tuner is required on either band. The SWR is 1:1.5 or below. I use a pair of raised radials per band. The design schematic and a pic are attached. I will sell for $500 & share shipping.
- Listing #1766892 - Submitted on 05/03/26 by Callsign K1ZN, Modified on 05/16/26 - IP: syn-035-129-189-022.res.spectrum.com
- Click to Contact -- Click Here to View Picture -- Send this Ad to a Friend
 MISC - LEEDS & NORTHRUP 5305 GALVANOMETER TEST
- This vintage piece of test equipment is physically in good condition and has had some testing performed on it and appears to function as it should. However it is sold As-Is as it was not fully tested. It is missing the leather Handle Strap. $35 plus shipping. I take PayPal, PMO and check.
- Listing #1768198 - Submitted on 05/16/26 by Callsign W6XI - IP: ip68-109-162-111.ph.ph.cox.net
- Click to Contact -- Click Here to View Picture -- Send this Ad to a Friend
- RADIOHF - FS: PJ-068 TYPE MIKE PLUG, DRAKE
- For Sale: PJ-068 type STRAIGHT Mike plug for Collins or Drake radios.
I no longer have the Right Angle type in the photo.
This the smaller 3 wire plugs 3/16" (0.210") not the 1/4" Diameter.
-----
$13.00 plus $3.50 shipping in the USA.
I am gd in QRZ for your check or USPS MO.
PayPal to: jtg4300 at yahoo.com
---Just let me know that payment is on the way and I will ship and get you the Tracking number.
See my other ads, will combine shipping where possible.
Thank you
- Listing #1764202 - Submitted on 04/05/26 by Callsign WA1BRI, Modified on 05/16/26 - IP: 47-199-186-130.fdr01.stgr.fl.ip.frontiernet.net
- Click to Contact -- Click Here to View Picture -- Send this Ad to a Friend
- ANTHF - ANTENNA MATCHING INDUCTOR
- This ceramic coil form, with link coil assembly coil wound on it was to be the matching assembly for a shortened 10 MHZ antenna. It could also be use to just add inductance to most any antenna. The form is 2.5 inces in diameter and has 32 groves for windings. The windings on the form are three turns for the Pimary link and 13 turns for the secondary winding. The windings are made of 10 and 14 Ga. solid copper wire. $27 shipped I take Paypal, Postal Mo and check
- Listing #1768197 - Submitted on 05/16/26 by Callsign W6XI - IP: ip68-109-162-111.ph.ph.cox.net
- Click to Contact -- Click Here to View Picture -- Send this Ad to a Friend
- MISC - Bencher BY-2 Chrome Iambic Paddle - NICE
- Here we have a chrome Bencher BY-2 iambic keyer paddle. It's in pretty good shape with a couple of tiny rust spots on the left and right sides.
Asking $100 plus shipping.
--
K8TJ
- Listing #1768196 - Submitted on 05/16/26 by Callsign K8TJ - IP: c-98-209-253-196.hsd1.mi.comcast.net
- Click to Contact -- Send this Ad to a Friend
- TEST - BIRD 5000H THRULINE WATTMETER ELEMENT
This element has seen lite use and shows no sign of use and has been tested.
Frequency range for the element is 2-30 MHz. $275 shipped. I take Paypal, Postal MO and check.
- Listing #1768195 - Submitted on 05/16/26 by Callsign W6XI - IP: ip68-109-162-111.ph.ph.cox.net
- Click to Contact -- Click Here to View Picture -- Send this Ad to a Friend
- MISC - CERAMIC COIL FORM / INDUCTOR
- This heavy ceramic coil form is 2. 5 inches in diameter and is 5 inches long. It has groves for 25 turns and has 22 turns on it. Diameter of the windings is 2.25 inches. There are mounting holes on one side of the form and pins that the winding is terminated at on the opposite side. $37 shipped. I take PayPal, Postal MO and check.
- Listing #1768194 - Submitted on 05/16/26 by Callsign W6XI - IP: ip68-109-162-111.ph.ph.cox.net
- Click to Contact -- Click Here to View Picture -- Send this Ad to a Friend
- ROTATORS - HYGAIN ROTOR LOWER MAST ADAPTER
- This adapter, HyGain P/N 5030500, fits any of the Ham type rotors and attaches to the bottom of the rotor with four 1.25 inches stainless bolts. (provided). It needs the clamp plate kit which includes two u-bolts and the plate.(not provide) to complete the clamp assembly. The two U-Bolt holes at the top of the unit, shown, are slightly larger than the stock U-Bolt holes by approximately 1/8 inch. This should not affect the strength of the assembly. $30 shipped. I take PayPal, Postal MO and check
- Listing #1768193 - Submitted on 05/16/26 by Callsign W6XI - IP: ip68-109-162-111.ph.ph.cox.net
- Click to Contact -- Click Here to View Picture -- Send this Ad to a Friend
- ROTATORS - Two Rotor Mast Clamp
- Two (2) Alliance (Z-19405) mast clamps. Left mount looks to be new. These work on Alliance HD-73 rotors. Will work on some Yaesu & Kenpro rotors too. Or use just to mount a mast down. You get the two mounts shown shipped for $93 to lower 48 states. Any questions call 301-233-0910. Thanks, Dave. N3EJT
- Listing #1768192 - Submitted on 05/16/26 by Callsign N3EJT - IP: 251.sub-174-219-227.myvzw.com
- Click to Contact -- Click Here to View Picture -- Send this Ad to a Friend
- RADIOVHF - PJ-068 COLLINS AND DRAKE AUDIO PLUGS
- Two of the three plugs are used but still very functional. Solder lugs on two units are still attached. No solder lugs on one unit just needs to be hard wired with the screw still attached. $15ea shipped. I take Paypal, PMO and check.
- Listing #1768191 - Submitted on 05/16/26 by Callsign W6XI - IP: ip68-109-162-111.ph.ph.cox.net
- Click to Contact -- Click Here to View Picture -- Send this Ad to a Friend
|
= Ad was Edited or Renewed 
= Original Ad
Previous 10 Ads
Next 10 Ads 
