|
 RADIOHF - IC-7610 FOR SALE WITH ACCESORIES 
- I am the original owner of this IC7610 SN 22002931 purchased on Sep 2023 that look and work as new. Never been modified for MARS neither for increased power,it has already installed the FW version 1.40 that allow DPD (digital predistorsion)to increase the spectral purity atenuating down the IMD3 over 50 db, I have the original box,power cable, handmic, and also I will include the remote control RC28 ($379 on amazon) to move the freq of the second receiver while you listen the main one and a remote small box to pull out any of the eight voice or CW memories as you can see at the attached picture.Besides I will include the data cable to connect the radio to your PC/laptop USB port for digital modes as FT8 or to do on the air recordings and playbacks.
I will ship all this for $2500 CONUS or we can meet within 50 miles and you pay $2500 cash or if you prefer come to my qth and see it working then you pick it up. I will accept zelle or PayPal (F&F option)or also your bank personal check.
- Listing #1770093 - Submitted on 06/04/26 by Callsign AD4C - IP: c-76-109-38-236.hsd1.fl.comcast.net
- Click to Contact -- Click Here to View Picture -- Send this Ad to a Friend
- RADIOHF - Apache Labs Anan-10 “Classic” w/ Extras
- This is a rare classic Apache Labs Anan 10. It debuted at $1500, and is prized for its build quality, 16-bit board and 7 virtual receivers that the 10e doesn’t have. Comes with breakout box for amp keying (ie with RCA), BNC to PL-259 cables, power cable and original box. Mint, nonsmoking home, everything works as it should.
Just $749 plus $18 shipping.
- Listing #1770071 - Submitted on 06/04/26 by Callsign K1FIE - IP: c-50-189-24-238.unallocated.comcastbusiness.net
- Click to Contact -- Click Here to View Picture -- Send this Ad to a Friend
- RADIOHF - Elecraft K3 Lots of Options Installed
- K3 #0609
Clean, bench tested working great
-
K3-10 / K3 10w Basic
KAT3 / ATU
KPA3 / 100w PA
KBPF3 / General Coverage Bandpass
KXV3 / Transverter Interface
KTCX03 / TCXO 1ppm
KDVR3 / Digital Recorder
KRX3 / Sub Receiver
-
Main RX Filters:
2.8 kHz filter
1.5 kHz filter
13 kHz filter
6 kHz filter
500 Hz filter
-
Sub RX Filters
1.8 kHz filter
500 Hz filter
••••••
Radio, DC cable, hand mic (Kenwood) and manuals
More pics available for the asking
$1585 plus shipping
- Listing #1770059 - Submitted on 06/04/26 by Callsign W8UAB, Web Site: https://swap.qth.com/search-results.php?keywords=W8UAB&fieldtosearch=Call - IP: 104-169-198-75.bng02.nrwl.oh.frontiernet.net
- Click to Contact -- Click Here to View Picture -- Send this Ad to a Friend
- RADIOHF - GRUNDIG Satellit 800 Receiver
- **********
Have super clean, great working GRUNDIG Satellit 800 Millenium Receiver. Covers 0.1 to 30 MHz, 87 to 108 MHz, and 118 to 137 MHz. Outstanding performance - comes with manual and power adapter.
**********
$369 plus shipping $57
**********
Note: more of my items-put my call in SEARCH and click SEARCH
**********
Payment via ZELLE, M.O. or personal check when clears.
**********
Thank you,
Tom Stack - WQ5J -
tom.stack102443 at gmail.com
**********
- Listing #1770047 - Submitted on 06/04/26 by Callsign WQ5J - IP: 104-53-68-31.lightspeed.rcsntx.sbcglobal.net
- Click to Contact -- Click Here to View Picture -- Send this Ad to a Friend
 RADIOHF - FS Elecraft K3S Loaded
-
For sale Elecraft K3S S/N 11090 with the following options installed:
13 KHz FM filter
6 kHz AM filter
2.7 kHz filter
1.8 kHz narrow
400 Hz 8 pole
KAT3 Auto Tuner
KBPF3 Gen'l Coverage BPF
KDVR3 Digital Voice Recorder
KTCXO
KRX3 Sub Receiver
2.7 kHz filter
400 Hz 8 pole
KXV3B
KPA3 100 Watt PA
Synthesizers are latest "A" versions in both receivers
This has been my station transceiver for many years and has been amazing with FW 5.67 installed. Works as it should in all respects.
I have replaced some of the front panel knobs with metal knobs and the factory SO-239 antenna connectors with BNC sockets.
$3400.00 Shipped in CONUS. Offers entertained
Additional photographs available on request
- Listing #1769791 - Submitted on 06/01/26 by Callsign N6AX, Modified on 06/04/26 - IP: 107-139-104-191.lightspeed.irvnca.sbcglobal.net
- Click to Contact -- Click Here to View Picture -- Send this Ad to a Friend
- RADIOVHF - FS Yaesu FRG-9600 VHF/UHF Receiver
-
For sale Yaesu FRG-9600 receiver.
Frequency range: 60-905 MHz
Tuning steps: 100 Hz, 1 / 5 / 10 / 12.5 / 25 KHz
Mode: AM-N / AM-W / FM-N / FM-W / SSB (Up to 460 MHz only!)
Channels 100 regular
Power supply: 12-15 VDC (Barrel connector, cable included)
Current drain : Max 550 mA
Antenna impedance / connector: 50 ohm / SO-239
Dimensions (W*H*D): 180*80*220 mm (7.09*3.15*8.66")
Weight: 2.2 Kg (4.85 lb)
Other features: Attenuator. Tone control. CAT-interface.
Tested across entire frequency range...works great! Display is bright.
Includes whip antenna
$195.00 plus shipping.
- Listing #1768925 - Submitted on 05/23/26 by Callsign N6AX, Modified on 06/04/26 - IP: 107-139-104-191.lightspeed.irvnca.sbcglobal.net
- Click to Contact -- Click Here to View Picture -- Send this Ad to a Friend
- RADIOHF - Collins 75S-3C receiver
- THIS RADIO IS IN BEAUTIFUL CONDITION AND WORKS GREAT. $725 PLUS SHIPPING
PAYPAL ZELLE OR ANY KIND OF CHECK.
- Listing #1769666 - Submitted on 05/31/26 by Callsign K9DTC, Modified on 06/04/26 - IP: c-98-253-212-63.hsd1.il.comcast.net
- Click to Contact -- Click Here to View Picture -- Send this Ad to a Friend
- RADIOANQ - FS; National NC-46 Receiver
- National NC-46 receiver. It looks new, a museum piece. All new tubes ($120 value). New HV capacitors and new paper/oil caps in audio section. Rest of paper caps check good. Works correctly. Every switch and control works perfect- a solid radio. Very rare, 4 watts push-pull audio. New polarized cord to prevent electrical shock. Ships to USA lower 48. $345 + $45 shipping.
Two NC-46 showed up on eBay in last three years and condition was deplorable and one was missing the dial bezel. Both sold for $250 making my radio with new tubes a good deal.
- Listing #1769409 - Submitted on 05/28/26 by Callsign N8FVJ, Modified on 06/03/26 - IP: 71-214-51-64.orlf.qwest.net
- Click to Contact -- Click Here to View Picture -- Send this Ad to a Friend
- RADIOHF - Elecraft K3/100 Transceiver # 8947 - WOW
- Elecraft K3/100 High Perf 160-6m Transceiver KPA3 2.8 # 8947 100 Watts
SER # 8947
$2795 Delivered - check, Zelle, PP FF ok.
This is the newest k3 that I have ever heard of...Maybe the last one before the k3s came out ?
100 Watts
KAT3 TUNER
2.8 SSB filter
13K FM
400 HZ CW
KRX3A Sub receiver
2.7 ssb
400 cw
5 filters total
2 KSYN3A boards !
kbpf3 bandpass filter
gold pins
kio3
kxv3a
Neogrip VFO rubber
KDVR
Latest firmware installed. 5.67
Works as it should.
Great condition.
Power cord and manual
Used it today on CW and SSB.
If you are looking for a great radio with lots of options ,this may be for you.
And if you want a K3 with less options,I have many to choose from.
Please see pictures for more details.
If it doesn't sell the way it is,I may remove most of the options.
Over $3000 in parts if I strip it....
Local pickup is also fine.
I can be reached through email if you have questions about this unit.
Larry K6RO
- Listing #1769974 - Submitted on 06/03/26 by Callsign K6RO - IP: syn-067-253-098-241.res.spectrum.com
- Click to Contact -- Click Here to View Picture -- Send this Ad to a Friend
- DIGITAL - Dx engineering RTR-1A. Receive interface
- Now, with DX Engineering RTR-1A Receive Antenna Interfaces, you can safely connect dedicated receive antennas to HF transceivers that do not have a separate RX antenna input port. Finally, DX Engineering RTR-1A Receive Antenna Interfaces allow the standard transceiver owner to enjoy the advantages of separate receive antennas! Also, many enthusiasts are providing failsafe protection for the unswitched receive antenna (RX ANT) port on their very expensive transceivers with RTR-1A interfaces--very inexpensive insurance, indeed! Now RoHS compliant, these multi-purpose RTR-1A interfaces feature a patented* receive antenna limiter circuit that passes normal level signals without affecting receiver IMD.
The RTR-1A is a very useful device for many applications, including:
-- Connection of external receiving antennas to transceivers lacking external antenna ports
-- T-R antenna switch for older equipment using separate transmitters and receivers
Cost $100. Shipped pay vua Zelle or check
- Listing #1769965 - Submitted on 06/03/26 by Callsign 734-627-7610 - IP: syn-174-084-015-237.res.spectrum.com
- Click to Contact -- Click Here to View Picture -- Send this Ad to a Friend
|
= Ad was Edited or Renewed 
= Original Ad
Next 10 Ads 
